| Enclosure | Plastic, type PC (UL 94 V-0) Net dimensions (d x w x h): 90 x 88 x 56 mm Recommended space for installation (d x w x h): 130 x 100 x 100 mm Color: Light Grey. RAL 7035 |
| Mounting | Wall. DIN rail EN60715 TH35. |
| Terminal Wiring (for power supply and low-voltage signals) |
Per terminal: solid wires or stranded wires (twisted or with ferrule) 1 core: 0.5mm²…2.5mm² 2 cores: 0.5mm²…1.5mm² 3 cores: not permitted If cables are more than 3.0 meters long, Class 2 cable is required. |
| Power | 1 x Plug-in screw terminal block (3 poles) Positive, Negative, Earth 24VDC +/-10% |
| Ethernet | 1 x Ethernet 10/100 Mbps RJ45 2 x Ethernet LED: port link and activity |
| Port A | 1 x DALI port (Plug-in screw terminal block orange 2 poles) 1500VDC isolation from other ports DALI guaranteed power: 235mA Voltage rating: 16VDC 1 x Plug-in screw terminal block green (2 poles) Reserved for future use |
| Switch A (SWA) |
1 x DIP-Switch for serial EIA485 configuration: Reserved for future use |
| PORT B | NDAL-0640200-BAC 1 x Serial EIA232 (SUB-D9 male connector) Reserved for future use 1 x Serial EIA485 Plug-in screw terminal block (3 poles) A, B, SG (Reference ground or shield) 1500VDC isolation from other ports (except PORT B: EIA232) NDAL-1280200-BAC 1 x Serial EIA232 (SUB-D9 male connector) Reserved for future use 1 x DALI port (Plug-in screw terminal block green 2 poles) 1500VDC isolation from other ports DALI guaranteed power: 235mA Voltage rating: 16VDC |
| Switch B (SWB) |
1 x DIP-Switch for serial EIA485 configuration: Position 1: ON: 120 Ω termination active Off: 120 Ω termination inactive Position 2-3: ON: Polarization active Off: Polarization inactive |
| Battery | Size: Coin 20mm x 3.2mm Capacity: 3V / 225mAh Type: Manganese Dioxide Lithium |
| Console Port | Mini Type-B USB 2.0 compliant 1500VDC isolation |
| USB port | Type-A USB 2.0 compliant Only for USB flash storage device (USB pen drive) Power consumption limited to 150mA (HDD connection not allowed) |
| Push Button | Button A: Check the user manual Button B: Check the user manual |
| Operation Temperature |
0°C to +50°C |
| Operational Humidity |
5 to 95%, no condensation |
| Protection | IP20 (IEC60529) |
| LED Indicators |
10 x Onboard LED indicators 2 x Run (Power)/Error 2 x Ethernet Link/Speed 2 x Port A TX/RX 2 x Port B TX/RX 1 x Button A indicator 1 x Button B indicator |
NDAL-(064/128)0200-BAC
The Nindoma NDAL-(064/128)0200-BAC Gateway has been specially designed to work as a translator between a DALI installation and BACnet or BACnet MSTP based control and monitoring system.
Nindoma acts as a master in the DALI bus, allowing both BACnet IP and BACnet MSTP client/master devices to read and write on all configured DALI signals.
Features :
- Handles conversion between BACnet (IP & MSTP) and DALI/DALI-2 ballasts and DALI-2 sensors (occupancy and light instances)
- Support for BACnet IP or BACnet MSTP, not both simultaneously*
- Designed following DALI IEC 62386 standard and certified by DiiA
- Supports parts 201, 202 and 207 for ECGs
- Supports parts 303 and 304 for Sensors
- DALI line scan (ballast detection) and commissioning
- Configuration through IP or USB (Console) port
- Front cover LED indicators to provide easy to check communication status on both the Ethernet and serial ports
- Includes Nindoma MAPS with automatic updates for both Nindoma MAPS and Gateway’s firmware
Description
Datasheet
Manual Installation
Manual Installation
Version
| No | Name | Date |
|---|---|---|
| 1 | NDAL-(064/128)0200-BAC | September 2022 |